How to Fix a Recline Footrest

How to Fix a Recline Footrest

Have you ever had the tragic experience of waking up and finding that your reclining footrest is broken? You might wonder how this could happen or if it is something you must fix yourself. This blog post will explain how to fix a recline footrest.

Why Is Your Footrest Damaged?

There are various causes of damage to a recliner’s footrest. Some people put too much weight on it and cause the footrest to break or bend. Others put their feet on the footrest when they sit down, which can cause the footrest to become loose and fall off. And still, others accidentally step on the footrest when sitting down, causing it to break or crack.

One of the most typical reasons is that the footrest is not tall enough. When you sit in the recliner, your feet naturally want to rest on the footrest. If the footrest is too-short, it will keep your feet from resting comfortably. You may also notice that the footrest is not straight.

This is usually due to improper installation.

It is also possible that your footrest got old and rusty, or you showed carelessness.

A Useful Tip:

If you’re planning to have your recliner repaired, it’s advisable to look up the warranty first.

You can contact the manufacturer if the warranty has covered the recliner.

If you’re going to do any repairs, don’t start until you’ve contacted your manufacturer.

This will cause your warranty to be void, and if your chair is not under warranty, then you can fix your footrest using these easy instructions.

How to Fix a Recline Footrest In 5 Easy Steps:

Tools Required:

All you need is:

  • a Phillips screwdriver
  • a hammer
  • a pair of pliers
  •  a pair of needle-nose pliers
  • a Phillips-head socket wrench

Reclining Footrests Are Easier to Fix than You Think

If you’re looking to repair your reclining footrest, it might be a good idea to get it checked by a professional first. If you decide to try it yourself, read the instructions thoroughly and follow them exactly. If you skip any steps, you could damage the product.

Step 1: Remove the Recliner Footrest

First, you need to remove the footrest. This is accomplished by unscrewing the three screws that hold it to the base. If the screws are tight, you may need a flat-head screwdriver. Once removed, you can use a screwdriver to pry the footrest from the base.

Step 2: Clean the Footrest

Next, you need to clean the footrest. This can be a dirty job, so ensure you have the right supplies. The best way to clean a footrest is to use a dry cloth and mild soap. You can even use a vacuum to suck up the dirt.

Step 3: Apply Sealant to Prevent Rusting

After cleaning, you need to apply a sealant. This thin, clear plastic coating will help prevent the footrest from rusting. You can buy a sealant at most hardware stores. You should apply the sealant with a paintbrush.

Step 4: Reinstall the Footrest

Once you’ve applied the sealant, you must put the footrest back together. First, you need to put the footrest back into the base. You can do this by screwing the footrest back into the base. Then, you need to screw the footrest back onto the base.

You can also do this by unscrewing the footrest from the base and then screwing it back onto the base.

Step 5: Check That the Footrest Is Working Properly

Once you’ve reassembled the footrest, you must check that it works properly. You can do this by sitting in the recliner and tapping on the footrest. If the footrest is working correctly, you should be able to adjust it to the desired position.


How Do I Fix a Reclining Footrest?

To fix a reclining footrest, remove the footrest and the cushion. Then, you will have to remove the seat’s back panel and the foam behind the back panel. Then, you will have to replace the cushion and the footrest.

What Is the Best Way to Clean My Reclining Footrest?

You can use water, soap, and a towel to clean your reclining footrest.

What Should I Do If I Spill Something on My Reclining Footrest?

If you spill something on your reclining footrest, you should immediately wipe it with a towel or paper towel.

How Do I Know If I Need a Footrest?

This is not always the case. If your back, neck, and head are hurting, or you have sore, strained, or injured muscles, you may use your feet to support you improperly.

What Is the Best Way to Install a Footrest?

The best way to install a footrest is to measure the distance from the floor to the front edge of your chair. Then, you will need to estimate the distance from the floor to the back of your chair.

Final Thought

A footrest is part of the chair; sometimes, a chair has just one, which can be a problem. If this is the case with your chair, it may be time to fix it. You can do this in about 20 minutes by following the steps above.

Find More:

Leave a Reply