How To Change Drawer Pulls To Knobs

How To Change Drawer Pulls To Knobs

Changing the look of your kitchen drawers is a great way to give your home a facelift and make it feel more like your own. Many of us have seen many different ways to change drawer pulls to knobs. There are some straightforward ways to do this and some that are a bit more complicated. This post will show you how to change your drawer pulls to knobs and make them look new.

Steps to Step Guide on How to Change Drawer Pulls To Knobs:

Things you will need:

  • Knobs 
  • Screwdriver 
  • Wood filler
  • 200 grit Sandpaper
  • Measuring tape
  • Pencil
  • Drill machine
  • Painter tape
  • Paint

Use this guide to learn how to replace drawer pulls. This article will teach you how to remove the old drawer pull and replace it with a new knob.

Step 1: Take the screws out

Step 2: Use wood filler to fill the screw holes.

I like the orange Elmer’s Carpenter’s Wood Filler because it doesn’t matter what color filler you get if you paint your piece.

I fill in the hole until the surface bleeds out.

Different climates cause different dry times. After you have the surface smoothed, I use 180-grit sandpaper to polish it.

Step 3: Once you’ve measured, cut a circle of hardboard to the exact size of your new handle.

The trick is to ensure a piece of painter’s tape between the two holes.

Step 4: Measure halfway across the drawer front and make a dot

Step 5: Use your drill to drill a new hole.

Step 6: Give your drawer quicksand. This will help the finish adhere to your drawers. Remove all dust. Paint your drawer.

Step 7: Install your new knob.

Here you go! It’s super simple and takes less than two minutes. Just get a pull, and follow the instructions in the video.

You can quickly drill holes in your teeth or even fill them with colored resin for that fun, funky look that matches your personality and style! Get Rewrite to help you write your essays, articles, speeches, and more.

This one’s beautiful, but we also have the silver and bronze ones if you need something less traditional.

Why would you need to replace the drawer pulls with knobs?

It’s all about the tiny things you do. For instance, if you add a coat rack to your closet, you’ll get more storage, not to mention make your clothes look good.

A high-quality, affordable door knob is the perfect finish touch for your home or office.

1. You can also add a makeable change to your home by making one of the following minor changes:

2. Add more lights to the porch.

You replace your old hardware with a modern and stylish design.

For example, knobs are the replacement of large pullers. They give a different appearance to the furniture and cover a smaller area than the others.

It’s easy to use and open the door or cabinet without much effort.

If it loses, tighten the cables and loosen them with the screwdriver at home.

To make the holder for your knob, you’ll need a few supplies easily found at the local hardware store.

This will give your room and furniture a new look and polish.

In the past, you should not have had a problem with the drawer handle rust because the door pullers are exposed to the elements and are affected.

The easiest way to change the drawer pulls to knobs is to remove the drawer pull, unscrew the screws, and then replace the screws with new knobs.

Advantages of knob-over pullers

A standard headboard uses only a single screw, while pull-throughs with two screw points are available.

Some pulls are shorter and thicker than others, so choosing the accurate length and thickness is challenging.

It’s great that you found your ideal dimensions; you are so lucky!

You can decide which knobs go in the drawer without measuring.

There are many different materials for kitchen and bathroom knobs, from brass to iron to crystal and plastic.

Many kinds of stones have different designs, some are engraved, and some are smooth and colored.

This is a good tool for tightening loose skin around your neck and back without pulling.

An easy tip to match the new knobs with drawer pulls

When replacing an old knob with a new one, you must take a snapshot before installing the new knob.

Choose a universal design, and you’ll get to enjoy many different colors.

Create a mood board of pictures or items you like. Match the colors and textures with them, and try out some looks.

Mixing and contrasting colors that don’t go together will never give a garment an attractive appearance.

For kitchen cabinets, you want them to be smooth and easy to clean.

An antique finish is essential, especially if the drawer looks classic. A simple, modern knob for opening and closing helps clean the drawer.

FAQs

Do I need to cut the holes in the drawer pulls to make them fit the knobs?

No, you don’t have to cut the holes in the drawer pulls. You can put the knobs on the drawer pulls and use wood glue to hold them in place.

What is the best way to change the drawer pulls to knobs?

The best way to change the drawer pulls to knobs is to use a screwdriver to unscrew the drawer pulls and then use a drill to drill holes for the screws you will put into the wood.

How long does it take to do this project? 

It takes about four days, with two days for the first round of design and three days for the second design round.

Can I have the color I want?

Yes, we can custom-make any color of the products you need.

Conclusion

In conclusion, changing your drawer pulls to knobs is a great way to make your kitchen look modern and sleek without spending much money. The best part is that it’s straightforward, and you can DIY it with a few simple tools.

Find More:

Leave a Reply